Photocathode

A photocathode is a negatively charged electrode in a light detection device such as the input screen in an image intensifier (II) that is coated with a photosensitive compound. When this is struck by light photons, the absorbed energy causes electron emission due to the photoelectric (PE) effect.

Composition

In an image intensifier, the photocathode is a thin layer of an alloy of antimony and cesium (SbCs3). The photocathode converts the light photons emitted by the entrance phosphor to photoelectrons via the PE effect:

  • electrons are produced in direct proportion to the brightness of the input screen
  • 10-20% conversion efficiency, i.e. approx. 400 electrons are released from the photocathode for each 60 keV x-ray photon absorbed by the phosphor

In order to preserve the image faithfully, the input phosphor and photocathode must be in intimate contact with each other, separated only by a thin transparent wafer which prevents chemical interaction between the two layers.

The light spectrum of the input phosphor should also match the sensitivity profile of the photocathode, to maximize the conversion efficiency from light photons to photoelectrons.

Imaging technology

Article information

rID: 74263
Synonyms or Alternate Spellings:
  • Photocathodes

Support Radiopaedia and see fewer ads

Updating… Please wait.

 Unable to process the form. Check for errors and try again.

 Thank you for updating your details.